• Est 1981
  • Fast Delivery
  • Large Stock
  • Industry Experience
  • Competitive Pricing
  • Bespoke Cutting Service
Fabric Reinforced Rubber Gaskets

Fabric Reinforced Rubber Gaskets

Select your desired material grade from our options below. If you need assistance choosing the most appropriate material grade or are looking for something not listed, please contact us.

Choose from a selection of default gasket designs, or upload your custom gasket design with any additional requirements.

Technical data for each material is available below.

Images are used for illustration purposes. The final colours may not exactly reflect per the images shown and thicknesses will vary per your requirements. Please contact us for more information.

Choose Your Gasket

Gasket Design Options

Circular Gasket/Washer
Solid Disc
Circular Gasket with Holes
Circular/Flange Gasket with Holes
Square/Rectangular Gasket
Solid Square/Rectangular
Square/Rectangular Gasket with Holes
Square/Rectangular, Square Centre with Holes
Square/Rectangular, Circular Centre
Square/Rectangular, Circular Centre with Holes
Flange Gasket
Rubber Strip
Custom Gasket
  • Neoprene/SBR 1-ply Insertion Rubber
  • Medium Premium Nitrile/SBR Insertion Rubber
  • High Grade Reinforced Nitrile
  • High Grade Reinforced Coated Nylon Neoprene
  • High Grade 2-ply Reinforced Nitrile
  • Economy 1-ply Insertion NR/SBR
  • Commercial 1-ply Insertion NR/SBR
  • Commercial 2-ply Fabric Insertion SBR
View Material ProductDownload Data Sheet
  • REACH, RoHS, PAH and CE compliant
  • For use with commercial quality applications
  • SBR blend with a 1 ply 22gsm cotton fabric reinforcement: 70° Shore
PROPERTIES TEST METHOD VALUES FPS UNITS TEST METHOD VALUES METRIC UNITS
SPECIFIC GRAVITY DIN 53508 1.45 ± 0.05 ASTM D297 1.45 ± 0.05
HARDNESS DIN 53505 70 ± 5 SH A ASTM D2240 70 ± 5 SH A
TENSILE STRENGTH (MIN) DIN 53504 569 PSI ASTM D412 40 KG/CM2
ELONGATION AT BREAK (MIN) DIN 53504 200% ASTM D412 200%
COMPRESSION SET (70 ºC/24 HRS/25% SET) (MAX) DIN ISO 815-1 40% ASTM D395 METHOD B 40%
TEAR RESISTANCE (ANGULAR) MIN DIN 53515 100 LBS/INCH ASTM D624 18 KG/CM
CHANGE IN PROPERTIES
HEAT AGEING (72 HRS. AT 70ºC) ASTM D573
— HARDNESS (PTS) + 5 (MAX) + 5 (MAX)
— TENSILE STRENGTH (%) + 10 / – 25 + 10 / – 25
— ELONGATION AT BREAK (%) + 10 / – 25 + 10 / – 25
VOLUME SWELL : AT 70º C FOR 72 HRS/IN ASTM D 471
IRM OIL NO.1 + 33% + 33%
IRM OIL NO.2 + 47% + 47%
IRM OIL NO.3 + 90% + 90%
POLYMER CONTENT (NEOPRENE) 10% 10%
CHEMICAL RESISTANCE
— OZONE FAIR ASTM D 1149 FAIR
— DILUTE ACIDS AND BASES FAIR FAIR
— CONCENTRATED ACIDS AND BASES NOT RECOMMENDED NOT RECOMMENDED
— OILS NOT RECOMMENDED NOT RECOMMENDED
— SOLVENTS NOT RECOMMENDED NOT RECOMMENDED
TEMPERATURE RANGE -30 º TO +90º C -30 º TO +90º C
COLOUR BLACK
INSERTION 1 PLY 22GSM COTTON FABRIC INSERTION
View Material ProductDownload Data Sheet
  • REACH, RoHS, PAH and CE compliant
  • For use in low to medium applications
  • A Nitrile blend sheeting with a 1 ply polyester fabric reinforcement: 70° Shore
PROPERTIES TEST METHOD VALUES FPS UNITS TEST METHOD VALUES METRIC UNITS
SPECIFIC GRAVITY DIN 53508 1.45 ± 0.05 ASTM D297 1.45 ± 0.05
HARDNESS DIN 53505 70 ± 5 SH A ASTM D2240 70 ± 5 SH A
TENSILE STRENGTH ( MIN ) DIN 53504 569 PSI ASTM D412 40 KG/CM2
ELONGATION AT BREAK ( MIN ) DIN 53504 200% ASTM D412 200%
COMPRESSION SET (70 ºC/24 HRS/25% SET) (MAX) DIN ISO 815-1 40% ASTM D395 METHOD B 40%
TEAR RESISTANCE ( ANGULAR ) MIN DIN 53515 100 LBS/INCH ASTM D624 18 KG/CM
CHANGE IN PROPERTIES
HEAT AGEING ( 72 HRS. AT 70 ºC ) ASTM D573
— HARDNESS (PTS) + 5 (MAX) + 5 (MAX)
— TENSILE STRENGTH (%) + 10 / – 25 + 10 / – 25
— ELONGATION AT BREAK (%) + 10 / – 25 + 10 / – 25
VOLUME SWELL : AT 70º C FOR 72 HRS/IN ASTM D 471
IRM OIL NO.1 + 30% + 30%
IRM OIL NO.2 + 44% + 44%
IRM OIL NO.3 + 85% + 85%
POLYMER CONTENT (NITRILE) 10% 10%
CHEMICAL RESISTANCE
— OZONE FAIR ASTM D 1149 FAIR
— DILUTE ACIDS AND BASES FAIR FAIR
— CONCENTRATED ACIDS AND BASES NOT RECOMMENDED NOT RECOMMENDED
— OILS NOT RECOMMENDED NOT RECOMMENDED
— SOLVENTS NOT RECOMMENDED NOT RECOMMENDED
TEMPERATURE RANGE -30 º TO +90º C -30 º TO +90º C
INSERTION 1 PLY 22GSM COTTON FABRIC INSERTION
View Material ProductDownload Data Sheet
  • REACH, RoHS, PAH and CE compliant
  • Certified to BS2751
  • High Grade Nitrile Reinforced – 1ply 150GSM Nylon Fabric: 70° Shore
View Material ProductDownload Data Sheet
  • Generally conforms to BS2752-C60
  • REACH, RoHS, PAH and CE compliant
  • 1 ply 150 GSM Nylon: 60° Shore
PROPERTIES TEST METHOD VALUES
METRIC UNITS
SPECIFIC GRAVITY BS 903: PART A1 1.30
HARDNESS BS 903: PART A26 60 ± 5 IRHD
TENSILE STRENGTH (KG/CM2) BS 903:  PART A2 130
ELONGATION AT BREAK (MIN) BS 903: PART A2 350%
COMPRESSION SET (70ºC/24 HRS/25% SET) (MAX) BS 903: PART A6 25%
TEAR RESISTANCE ( ANGULAR ) MIN BS 903:  PART A3 35 Kg/cm
RESISTANCE TO ACCELERATED AGEING- 168HRS AT 70˚C BS 903: PART A19
— HARDNESS (Pts) BS 903: PART A26 + 7 (MAX)
— TENSILE STRENGTH (%) BS 903: PART A2 -12 (MAX)
— ELONGATION AT BREAK (%) BS 903: PART A2 -20 (MAX)
VOLUME SWELL: AT 40˚C FOR 24 HRS/IN BS 903: PART A16
FUEL B + 70% (MAX)
RESISTANCE TO LOW TEMPERATURE AT –

40ºC

 BS 903: PART A13 MEETS REQUIREMENTS
ADHESION TO AND CORROSION OF METALS BS 903: PART A 37 MEETS REQUIREMENTS
POLYMER CONTENT (NEOPRENE) 100%
ADDITIONAL INFORMATION –
CHEMICAL RESISTANCE
— OZONE BS 903: PART A 43 GOOD
— DILUTE ACIDS AND BASES BS 903: PART A16 GOOD
— CONCENTRATED ACIDS AND BASES NOT RECOMMENDED
— MINERAL OILS – PARAFINNIC &

NAPHTHANIC HC

 GOOD
— MINERAL OILS – AROMATIC HC FAIR
–ANIMAL/VEGETABLE OIL GOOD
–SOLVENTS FAIR
TEMPERATURE RANGE -30º TO + 120º C
COLOUR BLACK
INSERTION 1PLY 150GSM Nylon fabric reinforcement
VOLUME SWELL DATA
RESISTANCE TO LIQUIDS BS ISO 1817, 24 h at (40±1) °C -0
VOLUME CHANGE (%) AFTER IMMERSION IN LIQUID B BS ISO 1817, 24 h at (40±1) °C +70
RESISTANCE TO ACCELERATED AGEING PART A19, AIR-OVEN METHOD A, (168±2)h, (70±1)°C -0
CHANGE IN HARDNESS DEGREES (IRHD) PART A26, METHOD N, MEASUREMENTS BEFORE AND AFTER AGEING ON THE SAME 2 PLIES EACH 2.00MM THICK +7
MAXIMUM CHANGE IN TENSILE STRENGTH (% OF ORIGINAL VALUE) PART A2, TYPE 1 OR TYPE 2 DUMBBELLS -12
MAXIMUM CHANGE IN ELONGATION AT BREAK (% OF ORIGINAL VALUE) PART A2, TYPE 1 OR TYPE 2 DUMBBELLS -20
View Material ProductDownload Data Sheet
  • REACH, RoHS, PAH and CE compliant
  • Certified to BS2751
  • High Grade Nylon Reinforced – 2PLY 150GSM Nylon Fabric Reinforcement
View Material ProductDownload Data Sheet
  • For use where a cheaper material will suit
  • Commercial Quality with 1 ply insertion
  • NR/SBR blend: 70° Shore
PROPERTIES VALUES
Colour Black
Compound NR/SBR
Density [Specific Gravity] 1.60
Hardness [Degrees Shore A] 70o ± 5
Tensile Strength [kg/cm2] 30
Elongation At Break 200%
Temperature Range -20 to +70 oC
Abrasion Resistance NA
Insertion 1 PLY POLYESTER FABRIC INSERTION
View Material ProductDownload Data Sheet
  • REACH, RoHS, PAH and CE compliant
  • Commercial Premium Quality with a 1 ply cloth insertion
  • NR/SBR blend: 70° Shore
PROPERTIES TEST METHOD VALUES FPS UNITS TEST METHOD VALUES METRIC UNITS
SPECIFIC GRAVITY DIN 53508 1.50±0.05 ASTM D297 1.50±0.05
HARDNESS DIN 53505 70 ± 5 SH A ASTM D2240 70 ± 5 SH A
TENSILE STRENGTH ( MIN ) DIN 53504 426 PSI ASTM D412 30 KG/CM2
ELONGATION AT BREAK ( MIN ) DIN 53504 200% ASTM D412 200%
TEAR RESISTANCE ( ANGULAR ) MIN DIN 53515 90 LBS/INCH ASTM D624 16 KG/CM
CHANGE IN PROPERTIES AFTER
HEAT AGEING FOR ( 72 HRS. AT 70 ºC ) ASTM D573
— HARDNESS (PTS) + 5 (MAX) + 5 (MAX)
— TENSILE STRENGTH (%) + 10 / -25 + 10 / -25
— ELONGATION AT BREAK (%) + 10 / -25 + 10 / -25
VOLUME SWELL : AT 70ºC FOR 72 HRS ASTM D 471
IN IRM OIL NO.1 NOT RECOMMENDED NOT RECOMMENDED
IN IRM OIL NO.2 NOT RECOMMENDED NOT RECOMMENDED
IN IRM OIL NO.3 NOT RECOMMENDED NOT RECOMMENDED
CHEMICAL RESISTANCE
— OZONE NOT RECOMMENDED ASTM D 1149 NOT RECOMMENDED
— DILUTE ACIDS AND BASES NOT RECOMMENDED NOT RECOMMENDED
— CONCENTRATED ACIDS AND BASES NOT RECOMMENDED NOT RECOMMENDED
— OILS NOT RECOMMENDED NOT RECOMMENDED
— SOLVENTS NOT RECOMMENDED NOT RECOMMENDED
TEMPERATURE RANGE -20º TO + 70 ºC -20º TO + 70 ºC
COLOUR BLACK
INSERTION 1PLY COTTON 22+/-­‐5 GSM FABRIC
Download Data Sheet
PROPERTIES VALUES
Colour Black
Compound SBR
Density [Specific Gravity] 1.60
Hardness [Degrees Shore A] 85o ± 5
Tensile Strength [kg/cm2] 40
Elongation At Break 175%
Temperature Range -20 to +70 oC
Abrasion Resistance NA
Insertion 2 PLY EP80 FABRIC INSERTION